Nail Print Plate - Left & Right

NAIL PRINT PLATE - LEFT & RIGHT

Metal printing plate with different patterns.

The thematic 6x12 cm discs contain 12 different, 100% useful samples. Print on the entire surface of the nail, or use it to pattern just a detail.

USE:

Before use, remove the protective film from the printing plate, then thoroughly clean the surface with acetone. Clean the printhead gently with an acetone-free nail polish remover.

1. Apply the nail polish or the printing and painting gel to the selected nail print pattern.
2. Spread the nail polish or printing gel uniformly on the selected sample with the nail polish remover.
3. Pick up the pattern with the nail print head dynamically, with a slight rolling motion.
4. Using the nail print head, position the pattern on the nail and apply it to the nail with a rolling motion.
5. In the case of printing gel, cure the sample in a UV lamp for 2 minutes, in a UV/LED lamp for 1 minute. In the case of nail polish, wait until the nail polish dries quickly in the air (20 seconds).
6. After removing the silicone skin protection sticker, the nail is covered with a flexible gloss gel (e.g.: Extreme Gloss Gel) or, in the case of nail polish, with a top coat.